Dell Latitude 3160 Dell Owners Manual - Page 14

Installing the Display Assembly, Removing the Display Bezel, battery, base cover

Get Dell Latitude 3160 PDF manuals and user guides View all Dell Latitude 3160 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Installing the Display Assembly 1. Place the display assembly on the computer chassis. 2. Adjust the display hinges to align with the screw holders on the computer chassis. 3. Tighten the screws to secure the display assembly to the computer. 4. Connect the display cable to its connector on the system board. 5. Place the metal bracket to secure the display cable and tighten the screws to secure the metal bracket. 6. Connect the network cable to its connector on the system board. 7. Install the: a. WLAN b. battery c. base cover 8. Follow the procedures in After Working Inside Your Computer. Removing the Display Bezel NOTE: This task is applicable only if you have the non-touch version of the computer. 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. display assembly 3. Perform the following steps: a. Peel the plastic adhesive to access the display-bezel screws [1]. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Installing the Display Assembly
1.
Place the display assembly on the computer chassis.
2.
Adjust the display hinges to align with the screw holders on the computer chassis.
3.
Tighten the screws to secure the display assembly to the computer.
4.
Connect the display cable to its connector on the system board.
5.
Place the metal bracket to secure the display cable and tighten the screws to secure the metal
bracket.
6.
Connect the network cable to its connector on the system board.
7.
Install the:
a.
WLAN
b.
battery
c.
base cover
8.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Bezel
NOTE:
This task is applicable only if you have the non-touch version of the computer.
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
display assembly
3.
Perform the following steps:
a.
Peel the plastic adhesive to access the display-bezel screws [1].
14