Dell Latitude 3440 Owners Manual - Page 24
Installing the I/O Board, Removing the Coin-Cell Battery, Installing the Coin-Cell Battery
View all Dell Latitude 3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing the I/O Board 1. Place the I/O board in its slot. 2. Tighten the screw to secure the I/O board to the computer. 3. Connect the I/O cable to the I/O board. 4. Install: a) palmrest b) keyboard c) access panel d) SD card e) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) SD card c) access panel d) keyboard e) palmrest 3. Pry out the coin-cell battery from the system board. Installing the Coin-Cell Battery 1. Place the coin-cell battery in its slot. 2. Install: a) palmrest b) keyboard c) access panel d) SD card e) battery 3. Follow the procedures in After Working Inside Your Computer. 24
Installing the I/O Board
1.
Place the I/O board in its slot.
2.
Tighten the screw to secure the I/O board to the computer.
3.
Connect the I/O cable to the I/O board.
4.
Install:
a)
palmrest
b)
keyboard
c)
access panel
d)
SD card
e)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
SD card
c)
access panel
d)
keyboard
e)
palmrest
3.
Pry out the coin-cell battery from the system board.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery in its slot.
2.
Install:
a)
palmrest
b)
keyboard
c)
access panel
d)
SD card
e)
battery
3.
Follow the procedures in
After Working Inside Your Computer
.
24