Dell Latitude 3440 Owners Manual - Page 27
Installing the System Board, Removing the Heatsink Assembly
View all Dell Latitude 3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the System Board 1. Align the system board in its place on the computer. 2. Tighten the screw to secure the system board to the computer. 3. Connect the following cables: a) display b) DC-In Port c) speaker d) I/O board 4. Affix the tape to secure the display cable to the system board. 5. Install: a) coin-cell battery b) palmrest c) keyboard d) optical drive e) hard drive f) memory module g) WLAN card h) access panel i) SD card j) battery 6. Follow the procedures in After Working Inside Your Computer. Removing the Heatsink Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) SD card c) access panel d) memory module e) WLAN card f) hard drive g) optical drive h) keyboard i) palmrest j) system board 3. Flip the system board and place it on a flat surface. 4. Disconnect fan cable and remove the screws that secure the heatsink assembly to the system board. Lift the heatsink assembly from the system board. 27