Dell Latitude 3450 Dell Owners Manual - Page 8

Removing and Installing Components, Recommended Tools, Removing the Base Cover

Get Dell Latitude 3450 PDF manuals and user guides View all Dell Latitude 3450 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • #0 Phillips screwdriver • #1 Phillips screwdriver • Small plastic scribe Removing the Base Cover 1. Follow the procedures in Before Working Inside Your Computer. 2. Perform the following steps as shown in the illustration: a. Loosen the captive screws that secure the base cover to the computer [1] b. Pry the base cover along the edges to loosen it [2]. 3. Perform the following steps as shown in the illustration: a. Lift the base cover partially at a 45-degree angle [1]. b. Remove the base cover from the computer [2] 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
2
Removing and Installing Components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended Tools
The procedures in this document may require the following tools:
•
Small flat-blade screwdriver
•
#0 Phillips screwdriver
•
#1 Phillips screwdriver
•
Small plastic scribe
Removing the Base Cover
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Perform the following steps as shown in the illustration:
a.
Loosen the captive screws that secure the base cover to the computer [1]
b.
Pry the base cover along the edges to loosen it [2].
3.
Perform the following steps as shown in the illustration:
a.
Lift the base cover partially at a 45–degree angle [1].
b.
Remove the base cover from the computer [2]
8