Dell Latitude 5400 Service Manual - Page 68
Disconnect the cable from the connector on the system board [5].
View all Dell Latitude 5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
5. Peel the adhesive tape on the eDP cable that is connected to the system board [1]. 6. Remove the two (M2x3) screws that secure the eDP bracket to the system board [2]. 7. Remove the eDP bracket away from the computer [3]. 8. Lift the latch and disconnect the eDP cable from the connector on the system board [4]. 9. Disconnect the cable from the connector on the system board [5]. 68 Disassembly and reassembly
5.
Peel the adhesive tape on the eDP cable that is connected to the system board [1].
6.
Remove the two (M2x3) screws that secure the eDP bracket to the system board [2].
7.
Remove the eDP bracket away from the computer [3].
8.
Lift the latch and disconnect the eDP cable from the connector on the system board [4].
9.
Disconnect the cable from the connector on the system board [5].
68
Disassembly and reassembly