Dell Latitude 5400 Service Manual - Page 83
Disconnect and unroute the eDP cable [5
View all Dell Latitude 5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Steps 1. Unroute the wireless antenna from the routing guides on the system board [1]. 2. Peel off the tape securing the eDP cable bracket [2]. 3. Remove the two (M2x3) screws that secures the eDP cable bracket to the system board [3]. 4. Lift the eDP cable bracket from the system board [4]. 5. Disconnect and unroute the eDP cable [5, 6]. 6. Open the display assembly to a 180-degree angle and flip over the system, then place the system on a flat surface. Disassembly and reassembly 83
Steps
1.
Unroute the wireless antenna from the routing guides on the system board [1].
2.
Peel off the tape securing the eDP cable bracket [2].
3.
Remove the two (M2x3) screws that secures the eDP cable bracket to the system board [3].
4.
Lift the eDP cable bracket from the system board [4].
5.
Disconnect and unroute the eDP cable [5, 6].
6.
Open the display assembly to a 180-degree angle and flip over the system, then place the system on a flat surface.
Disassembly and reassembly
83