Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 27
Steps, Next steps
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Steps 1. Place the tablet on a flat and clean surface. 2. Connect the power-button daughter board FPC to the connector on the system board. 3. Replace the single screw (M2x5) to secure the power-button daughter board FPC to the system board. 4. Carefully close the base-cover assembly to its 45° angle. 5. Connect the battery cable to the connector on the system board. 6. Place the base-cover assembly and press the edges of the base-cover assembly to secure in to the tablet. 7. Replace the two screws (M2x3) and 19 screws (M2.5x8-Torx 8) to secure the base-cover assembly in place. Next steps 1. Install the handle (for the models shipped with a handle). 2. Install the stylus. Removing and installing components 27
Steps
1.
Place the tablet on a flat and clean surface.
2.
Connect the power-button daughter board FPC to the connector on the system board.
3.
Replace the single screw (M2x5) to secure the power-button daughter board FPC to the system board.
4.
Carefully close the base-cover assembly to its 45° angle.
5.
Connect the battery cable to the connector on the system board.
6.
Place the base-cover assembly and press the edges of the base-cover assembly to secure in to the tablet.
7.
Replace the two screws (M2x3) and 19 screws (M2.5x8—Torx 8) to secure the base-cover assembly in place.
Next steps
1.
Install the
handle
(for the models shipped with a handle).
2.
Install the
stylus
.
Removing and installing components
27