Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 50
RJ45 daughter-board, Removing the RJ45 daughter-board
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Steps NOTE: For models shipped with a Mini-serial RS232 connector in the expansion bay at the top side of the tablet. 1. Align the screw holes on the Mini-serial RS232 daughter-board with the screw holes on the system board. 2. Replace the two screws (M1x2.65) to secure the Mini-serial RS232 daughter-board to the system board. 3. Connect the Mini-serial RS232 FPC to the connector on the Mini-serial RS232 daughter-board. 4. Align the screw holes on the Mini-serial RS232 FPC bracket with the screw holes on the system board. 5. Replace the two screws (M2x3) to secure the Mini-serial RS232 FPC bracket to the system board. Next steps 1. Install the back-cover assembly. 2. Install the batteries. 3. Install the handle (for models shipped with handle). 4. Install the stylus. 5. Follow the procedure in after working inside your tablet. RJ45 daughter-board Removing the RJ45 daughter-board Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the stylus. 3. Remove the handle (for the models shipped with a handle). 4. Remove the batteries. 5. Remove the back-cover assembly. About this task The figure indicates the location of the RJ45 daughter-board and provides a visual representation of the removal procedure. 50 Removing and installing components