Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 53
World-facing camera, Removing the world-facing camera
![]() |
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Steps NOTE: For models shipped with a scanner in the expansion bay at the top side of the tablet. 1. Connect the scanner FPC to the connector in the decoder daughter-board. 2. Align the screw holes on the decoder daughter-board with the screw holes on the system board. 3. Replace the two screws (M1x2.65) to secure the decoder daughter-board to the system board. Next steps 1. Install the back-cover assembly. 2. Install the batteries. 3. Install the handle (for models shipped with handle). 4. Install the stylus. 5. Follow the procedure in after working inside your tablet. World-facing camera Removing the world-facing camera Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the stylus. 3. Remove the handle (for the models shipped with a handle). 4. Remove the batteries. 5. Remove the back-cover assembly. About this task The figure indicates the location of the world-facing camera and provides a visual representation of the removal procedure. Removing and installing components 53
![](/manual_guide/products/dell-latitude-7230-rugged-extreme-tablet-service-manual-4bbc7e1/53.png)