Dell Latitude C400 High-Capacity Battery Pack - Page 11
Removing the High-Capacity Battery Pack, Ensure that the computer is turned off, suspended in a power
View all Dell Latitude C400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 Open the latch on the front of the high-capacity battery pack. 4 Set the computer down over the battery pack an inch or two back from the front edge of the battery pack, and slide the computer to the front of the battery pack until it stops. Make sure that the hooks at the front corners of the battery pack fit into the slots on the front corners of the computer. 5 Close the latch at the front of the battery pack. Removing the High-Capacity Battery Pack NOTICE: If you choose to swap batteries with the computer in standby mode, you have up to 3.5 minutes to safely complete the battery replacement before the computer shuts down and loses any unsaved data. 1 Ensure that the computer is turned off, suspended in a power management mode, or connected to an electrical outlet. 2 Open the latch on the front of the battery pack, slide the computer back slightly, and lift the computer away. Dell™ Latitude™ C400 High-Capacity Battery Pack 9