Dell Latitude CPx J Service Manual - Page 12
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual - latitude cpx manual
View all Dell Latitude CPx J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Some of the computer's interface connectors are zero insertion force (ZIF) connectors. These connectors are not removable, but they must be released to disconnect the cable from them (see Figure 4). movable part of connector (do not remove) 1. Insert a small flat-blade screwdriver behind the movable part of the connector. 2. Push gently sideways on the movable part of the connector until it releases the interface cable. 3. Grasp the interface cable and pull it out of the connector. 1. Use a small flat-blade screwdriver to open the movable part of the ZIF connector. 2. Orient the end of the interface cable with the ZIF connector, and insert the end of the cable into the connector. 3. While holding the cable in place, close the ZIF connector. To ensure a firm connection, make sure the ZIF connector is completely closed. support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 5