Dell Latitude CPx J Service Manual - Page 36
Lvsod\²$vvhpeo\²/dw´k
View all Dell Latitude CPx J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Connect the two-wire back-light plug to the connector on the inverter. When the plug is all the way in the connector, the key slot in the center of the plug should not be visible. If you can see the key slot, the plug is not in the connector correctly. Pull the plug out, turn the plug over, and reinsert it into the connector. 8. Reinstall the four 5-mm screws to secure the LCD panel to the top cover. 1. Remove the main battery and secondary battery (if present). 2. Remove the device from the modular bay (if present). 3. Remove the display assembly. 4. Remove the LCD panel. 5. Remove the display assembly bezel latch by unsnapping the latch and captive spring from the inside of the display assembly top-cover assembly (see Figure 14 and Figure 16). support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 29