Dell Latitude E5250 Dell LatitudeE5250 / 5250 Owners Manual - Page 35
Installing the eDP cable, Removing the System Fan
![]() |
View all Dell Latitude E5250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing the eDP cable 1. Fix the eDP cable in its place on the display assembly. 2. Connect the eDP cable to its connector. 3. Install the: a. display panel b. display bezel c. display assembly d. display-hinge brackets e. palmrest f. keyboard g. keyboard trim h. hard-drive assembly i. memory j. battery k. base cover 4. Follow the procedures in After Working Inside Your Computer. Removing the System Fan 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. keyboard trim d. keyboard e. palmrest 3. Disconnect the system-fan cable from its connector on the system board. 35
![](/manual_guide/products/dell-latitude-e5250-dell-latitudee5250-5250-owneru002639s-manual-abf19a2/35.png)
Installing the eDP cable
1.
Fix the eDP cable in its place on the display assembly.
2.
Connect the eDP cable to its connector.
3.
Install the:
a.
display panel
b.
display bezel
c.
display assembly
d.
display-hinge brackets
e.
palmrest
f.
keyboard
g.
keyboard trim
h.
hard-drive assembly
i.
memory
j.
battery
k.
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System Fan
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
keyboard trim
d.
keyboard
e.
palmrest
3.
Disconnect the system-fan cable from its connector on the system board.
35