Dell Latitude E5250 Dell LatitudeE5250 / 5250 Owners Manual - Page 37

Removing the Coin-Cell Battery, Installing the Coin-cell Battery

Get Dell Latitude E5250 PDF manuals and user guides View all Dell Latitude E5250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. base cover b. battery c. memory d. hard-drive assembly e. keyboard trim f. keyboard g. palmrest 3. Perform the following steps to remove the coin-cell battery from the computer: a. Disconnect the coin-cell battery cable from its connector on the system board [1]. b. Pry the coin-cell battery to remove it from the computer [2]. Installing the Coin-cell Battery 1. Insert the coin-cell battery into its place on the system board. 2. Connect the coin-cell battery cable to its connector on the system board. 3. Install the: a. palmrest b. keyboard c. keyboard trim d. hard-drive assembly e. memory f. base cover 4. Follow the procedures in After Working Inside Your Computer. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
c.
memory
d.
hard-drive assembly
e.
keyboard trim
f.
keyboard
g.
palmrest
3.
Perform the following steps to remove the coin-cell battery from the computer:
a.
Disconnect the coin-cell battery cable from its connector on the system board [1].
b.
Pry the coin-cell battery to remove it from the computer [2].
Installing the Coin-cell Battery
1.
Insert the coin-cell battery into its place on the system board.
2.
Connect the coin-cell battery cable to its connector on the system board.
3.
Install the:
a.
palmrest
b.
keyboard
c.
keyboard trim
d.
hard-drive assembly
e.
memory
f.
base cover
4.
Follow the procedures in
After Working Inside Your Computer
.
37