Dell Latitude E6440 Dell Owners Manual - Page 23

Installing the Network Connector, Removing the Coin-Cell Battery

Page 23 highlights

Installing the Network Connector 1. Align the network connector to its position on the computer. 2. Place the network-connector bracket on the network connector. 3. Tighten the screw to secure the network-connector bracket to the computer. 4. Route the cable through the routing channel. 5. Connect the cable to the system board. 6. Install: a) base corner cap (left) b) base cover c) battery 7. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) base cover 3. Disconnect the coin-cell battery cable, pry the coin-cell battery upward and remove it from the computer. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

Installing the Network Connector
1.
Align the network connector to its position on the computer.
2.
Place the network-connector bracket on the network connector.
3.
Tighten the screw to secure the network-connector bracket to the computer.
4.
Route the cable through the routing channel.
5.
Connect the cable to the system board.
6.
Install:
a)
base corner cap (left)
b)
base cover
c)
battery
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
base cover
3.
Disconnect the coin-cell battery cable, pry the coin-cell battery upward and remove it from the computer.
23