Dell Latitude E6540 Owner's Manual - Page 23
Installing the Power Connector, base cover
View all Dell Latitude E6540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4. Lift the power-connector bracket from the computer. Lift the power connector from the computer. Installing the Power Connector 1. Align the power connector to its position in the computer. 2. Place the power-connector bracket on the power connector. 3. Tighten the screw to secure the power-connector bracket to the computer. 4. Route the cable through the routing channel. 5. Connect the cable to the system board. 6. Install: a) base cover b) base corner cap (right) c) battery 7. Follow the procedures in After Working Inside Your Computer. 23
4.
Lift the power-connector bracket from the computer. Lift the power connector from the computer.
Installing the Power Connector
1.
Align the power connector to its position in the computer.
2.
Place the power-connector bracket on the power connector.
3.
Tighten the screw to secure the power-connector bracket to the computer.
4.
Route the cable through the routing channel.
5.
Connect the cable to the system board.
6.
Install:
a)
base cover
b)
base corner cap (right)
c)
battery
7.
Follow the procedures in
After Working Inside Your Computer
.
23