Dell Latitude E6540 Owner's Manual - Page 31

Removing the WiFi-Switch Board, Installing the WiFi-Switch Board - wifi switch

Get Dell Latitude E6540 PDF manuals and user guides View all Dell Latitude E6540 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Removing the WiFi-Switch Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) SD Card b) ExpressCard c) battery d) keyboard e) display-hinge cap f) base cover g) base corner caps h) palmrest assembly 3. Perform the following steps as shown in the illustration: a) Disconnect the cable from the system board. b) Remove the screw that secures the WiFi-switch board and lift it from the computer. Installing the WiFi-Switch Board 1. Place the WiFi-switch board in its slot. 2. Tighten the screw to secure the WiFi-switch board to the computer. 3. Connect the cable to the system board. 4. Install: a) palmrest assembly b) base cover c) base corner caps d) display-hinge cap e) keyboard f) battery g) ExpressCard h) SD Card 5. Follow the procedures in After Working Inside Your Computer. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Removing the WiFi-Switch Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
SD Card
b)
ExpressCard
c)
battery
d)
keyboard
e)
display-hinge cap
f)
base cover
g)
base corner caps
h)
palmrest assembly
3.
Perform the following steps as shown in the illustration:
a)
Disconnect the cable from the system board.
b)
Remove the screw that secures the WiFi-switch board and lift it from the computer.
Installing the WiFi-Switch Board
1.
Place the WiFi-switch board in its slot.
2.
Tighten the screw to secure the WiFi-switch board to the computer.
3.
Connect the cable to the system board.
4.
Install:
a)
palmrest assembly
b)
base cover
c)
base corner caps
d)
display-hinge cap
e)
keyboard
f)
battery
g)
ExpressCard
h)
SD Card
5.
Follow the procedures in
After Working Inside Your Computer
.
31