Dell Latitude E7240 Ultrabook Latitude E7240 Owners Manual - Page 25
Installing the Heatsink, Removing the Display Assembly
![]() |
View all Dell Latitude E7240 Ultrabook manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing the Heatsink 1. Place the heatsink into its original position on the computer. 2. Tighten the screws to secure the heatsink to the computer. 3. Install: a. display assembly b. display-hinge cover c. palmrest d. keyboard e. keyboard trim f. mSATA g. base cover h. battery i. SD card 4. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. SD card c. base cover d. keyboard e. palmrest 3. Perform the following steps as shown in the illustration: a. Disconnect the WLAN cable from the system board [1]. b. Unroute the WLAN cables from the slot [2]. c. Remove the screw that secures the heatsink to the computer. 25
![](/manual_guide/products/dell-latitude-e7240-ultrabook-latitude-e7240-owners-manual-9df34fe/25.png)