Dell Latitude E7240 Ultrabook Latitude E7240 Owners Manual - Page 30
Removing the Power Connector, Installing the Power Connector
![]() |
View all Dell Latitude E7240 Ultrabook manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5. Follow the procedures in After Working Inside Your Computer. Removing the Power Connector 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. SD card b. battery c. base cover d. keyboard e. palmrest f. system fan 3. Disconnect the power-connector cable from the system board and remove the screw that secures the power connector to the computer. Remove the power connector from the computer. Installing the Power Connector 1. Insert the power connector in its slot. 2. Connect the power connector to the system board. 3. Tighten the screw that secures the power connector to the system board. 4. Install: a. system fan b. palmrest c. keyboard d. base cover e. battery f. SD card 5. Follow the procedures in After Working Inside Your Computer. 30
![](/manual_guide/products/dell-latitude-e7240-ultrabook-latitude-e7240-owners-manual-9df34fe/30.png)