Dell Latitude E7450 Dell Owners Manual - Page 18
Installing the Display Panel, Removing the Camera, display bezel, battery
View all Dell Latitude E7450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the Display Panel 1. Connect the display assembly cable to its connector on the display panel. 2. Place the display panel to its original position on the display assembly. 3. Tighten the screws to secure the display panel to the display assembly. 4. Install: a. display bezel b. battery 5. Follow the procedures in After Working Inside Your computer. Removing the Camera 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove . a. battery b. display bezel c. display panel 3. Perform the following steps as shown in the illustration: a. Disconnect the camera cable from the module [1]. b. Lift and remove the camera from the display assembly [2]. 18
Installing the Display Panel
1.
Connect the display assembly cable to its connector on the display panel.
2.
Place the display panel to its original position on the display assembly.
3.
Tighten the screws to secure the display panel to the display assembly.
4.
Install:
a.
display bezel
b.
battery
5.
Follow the procedures in
After Working Inside Your computer
.
Removing the Camera
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove .
a.
battery
b.
display bezel
c.
display panel
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the camera cable from the module [1].
b.
Lift and remove the camera from the display assembly [2].
18