Dell Latitude XT3 Media Base Tech Sheet - Page 6

Before Docking or Undocking Your Tablet-PC from the Media Base WARNING: If you are using a multiple-outlet power strip, use caution when you plug the AC adapter power cable into the power strip. Some power strips may allow you to insert the connector incorrectly. Incorrect insertion of the power connector could result in permanent damage to your media base as well as electric shock and/or fire. Ensure that you insert the ground prong of the power plug into the mating ground contact of the power strip. CAUTION: Use the Latitude™ XT3 media base with your Latitude XT3 only. If you use a media base from earlier models of Dell computers you may damage the media base or the Tablet-PC. CAUTION: If the Tablet-PC does not have a charged battery in the battery bay, you must shut down the Tablet-PC through the Windows Start menu and then undock the Tablet-PC. If you undock the Tablet-PC without a battery before shutting it down, you will lose data and the Tablet-PC may not recover normal operation for several minutes. Before Docking or Undocking Your Tablet-PC NOTE: If you re-install the operating system, complete the setup before docking the Tablet-PC to the media base. • Save and close any open files, and exit any open programs. • Set your Tablet-PC power management settings to ensure that the Tablet-PC does not enter sleep, standby, or hibernate mode when you close (lower) the display: a Click the Windows Power icon in the Notification area to display the Power icon pop-up window. b Click More power options. c Under the When I close the lid drop-down menu, select Do nothing. 4 Media Base