Dell Latitude XT3 Media Base Tech Sheet - Page 8
Undocking Your Tablet-PC From the Media Base, Removing and Installing the Optical Drive From, - release
View all Dell Latitude XT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Undocking Your Tablet-PC From the Media Base CAUTION: Never undock the Tablet-PC without first preparing the Tablet-PC for undocking. If you undock before preparing the Tablet-PC, you will lose data and the Tablet-PC may not recover normal operation for several minutes, if at all. CAUTION: If the Tablet-PC does not have a charged battery in the battery bay, you must shut down the Tablet-PC through the Windows Start menu and then undock the Tablet-PC. If you undock the Tablet-PC without a battery before shutting it down, you will lose data and the Tablet-PC may not recover normal operation for several minutes. 1 Follow the procedures in "Before Docking or Undocking Your Tablet-PC from the Media Base" on page 4. 2 Pull the Tablet-PC release lever forward to release the Tablet-PC from the media base. 3 Lift the Tablet-PC up and slide it out towards the back of the media base. Removing and Installing the Optical Drive From the Media Base Prior to removing or installing the optical drive from the media base, always perform the following: 1 Save and close any open files or programs, and turn off the Tablet-PC. 2 Undock the media base (see "Undocking Your Tablet-PC From the Media Base" on page 6). 6 Media Base