Dell Latitude XT3 Media Base Tech Sheet - Page 9
Media Base Specifications, Removing the Optical Drive - weight
View all Dell Latitude XT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Removing the Optical Drive To remove the optical drive: 1 Remove the screw that secures the optical drive to the media base. 2 Use your screwdriver to slide the drive out of the media bay. Installing the Optical Drive To install the optical drive: 1 Insert the optical drive into the media bay on the media base. 2 Replace the securing screw that holds the optical drive in place. Media Base Specifications Physical Height: Without feet With feet Width Depth Weight Ports and Connectors USB Docking 14.75 mm (0.58 inch) 16.25 mm (0.64 inch) 292.40 mm (11.51 inches) 191.50 mm (7.54 inches) 530 g (1.7 lbs) two 4-pin USB-2.0 compliant connector 144-pin connector Media Base 7
Media Base
7
Removing the Optical Drive
To remove the optical drive:
1
Remove the screw that secures the optical drive to the media base.
2
Use your screwdriver to slide the drive out of the media bay.
Installing the Optical Drive
To install the optical drive:
1
Insert the optical drive into the media bay on the media base.
2
Replace the securing screw that holds the optical drive in place.
Media Base Specifications
Physical
Height:
Without feet
14.75 mm (0.58 inch)
With feet
16.25 mm (0.64 inch)
Width
292.40 mm (11.51 inches)
Depth
191.50 mm (7.54 inches)
Weight
530 g (1.7 lbs)
Ports and Connectors
USB
two 4-pin USB-2.0 compliant connector
Docking
144-pin connector