Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 26
Installing the processor
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
a cover b front bezel c 2.5 hard drive assembly d cooling shroud e optical drive f heat sink assembly 3 To remove the processor: a Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1]. b Lift the lever upward and lift the processor shield [2]. c Lift the processor out of the socket [3]. CAUTION: Do not touch the processor socket pins, they are fragile and can be permanently damaged. Be careful not to bend the pins in the processor socket when removing the processor out of the socket. Installing the processor 1 Align the processor with the socket keys. CAUTION: Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the socket. 2 Align the pin-1 indicator of the processor with the triangle on the socket. 3 Place the processor on the socket such that the slots on the processor align with the socket keys. 4 Close the processor shield by sliding it under the retention screw. 5 Lower the socket lever and push it under the tab to lock it. 26 Disassembly and reassembly