Dell OptiPlex 5055 A Series Small Form Factor OptiPlex 5055 Small Form Factor - Page 52
Clock Speed, Maximum Clock Speed, Processor L2 Cache, HT Capable, Channel Mode, Memory Technology
View all Dell OptiPlex 5055 A Series Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 5. General Option System Information Boot Sequence Advanced Boot Options BIOS Setup Advanced Mode Date/Time Description Displays the following information: • System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date, Manufacture Date, Express Service Code and the Singed Firmware Update. • Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channel Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size, DIMM 3 Size and DIMM 4 Size. • PCI Information: Displays SLOT1_M.2, SLOT2_M.2 • Processor Information: Displays Processor Type, Core Count, Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit Technology. • Device Information: Displays LOM MAC Address, Video Controller, Audio Controller. • Boot Mode • Boot List option: - Legacy - UEFI (Default) • Enable Boot Devices • Boot Sequence - Add Boot Option - Remove Boot Option - View Boot Option Allows you to select the Enable Legacy Option ROMs option. By default, this option is selected. • Enabled(selected by default) • Disabled Allows you to select BIOS Setup Advanced Mode. By default, this option is selected. • Enabled(selected by default) • Disabled Allows you to set the date and time settings. Changes to the system date and time take effect immediately. Table 6. System Configuration Option Integrated NIC Serial Port Description Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not selected by default. The options are: • Disabled • Enabled • Enabled w/PXE (default) NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. The options are: • COM1 (Enabled by default) • COM2 (Disabled by default) • COM3 (Disabled by default) 52 System setup