Dell OptiPlex 5055 Ryzen CPU OptiPlex 5055 Small Form Factor Owners Manual - Page 24
Installing M.2 PCIe SSD, Heat sink assembly, Removing heat sink assembly
View all Dell OptiPlex 5055 Ryzen CPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing M.2 PCIe SSD 1 Insert the M.2 PCIe SSD to the connector 2 Press the blue plastic tab to secure the M.2 PCIe SSD. 3 Install the: a optical drive b cooling shroud c 2.5 inch hard drive assembly d front bezel e cover 4 Follow the procedure in After working inside your computer. Heat sink assembly Removing heat sink assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel c 2.5 inch hard drive assembly d cooling shroud e optical drive 3 To remove the heat sink assembly: a Disconnect the heat sink assembly cable from the connector on the system board [1]. b Loosen the 6 captive screws that secure the heat sink assembly to the system board [2]. NOTE: Loosen the screws based on the numbers available on the system board. c Lift the heat sink assembly away from the computer [3]. 24 Disassembly and reassembly