Dell OptiPlex 5055 Ryzen CPU OptiPlex 5055 Small Form Factor Owners Manual - Page 29
VGA Daughterboard, Removing the VGA daughter board, SD card, Removing SD card reader
View all Dell OptiPlex 5055 Ryzen CPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
VGA Daughterboard Removing the VGA daughter board 1 Follow the procedure in Before Working Inside Your Computer. 2 Remove the: a Back Cover b Bezel 3 Open the Front Bezel Door 4 To remove the VGA daughter board: a Remove the screws that secure the VGA connector to the computer [1]. b Slide the VGA connector to release it from the computer [2]. c Remove the screw that secures the VGA daughter board to the computer [3]. d Lift the VGA daughter board using the handle to remove it from the computer [4]. Installing the VGA daughter board 1 Align the VGA daughter board with the screw holder on the system board. 2 Tighten the screw to secure the VGA daughter board to the system board. 3 Insert the VGA connector into the slot at the back of the computer. 4 Tighten the screws to secure the VGA connector to the computer. 5 Install the: a Bezel b Cover 6 Follow the procedure in After Working Inside Your Computer. SD card Removing SD card reader 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel c 2.5 inch hard drive assembly d cooling shroud e optical drive f M.2 PCIe SSD 3 To remove the SD card reader: a Release the power cables from the retention clips on the SD card reader enclosure [1]. b Remove the 6 screws that secure the SD card reader [2]. c Lift the SD card reader away from the computer [3]. Disassembly and reassembly 29