Dell OptiPlex 5055 Ryzen CPU OptiPlex 5055 Small Form Factor Owners Manual - Page 28
Installing intrusion switch, Memory modules, Removing memory module
View all Dell OptiPlex 5055 Ryzen CPU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing intrusion switch 1 Insert the intrusion switch into the slot on the computer. 2 Connect the intrusion switch cable to the connector on the system board. 3 Install the: a cooling shroud b front bezel c cover 4 Follow the procedure in After working inside your computer. Memory modules Removing memory module 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b front bezel c 2.5 inch hard drive assembly d cooling shroud e optical drive 3 To remove the memory module: a Push the tabs on both sides of the memory module. b Lift the memory module from the connector on the system board. Installing memory module 1 Align the notch on the memory module with the tab on the memory module connector. 2 Insert the memory module into the memory module socket. 3 Press the memory module until the memory module retention tabs click into place. 4 Close the front panel door. 5 Install the: a optical drive b cooling shroud c 2.5 inch hard drive assembly d front bezel e cover 6 Follow the procedure in After working inside your computer. 28 Disassembly and reassembly