Dell OptiPlex 5060 Tower Setup and specifications guide - Page 12

Table 4. Storage specifications (continued) Type Form factor One 3.5 inch Drive One 2.5 inch Hard-Disk Drive (HDD) One 2.5 inch Self-encrypting Opal drive Hard-Disk Drive (SED HDD) Interface Capacity ● Class 20 Self Encrypting Opal 2.0 Solid State Drive SATA 3.0, Up to 6 Gbps Up to 2 TB, upto 7200 RPM ● SATA 5400 RPM Hard Disk Drive ● SATA 5400 RPM 8GB NAND Hybrid Hard Disk Drive ● SATA 7200 RPM Hard Disk Drive ● Upto 2 TB ● Upto 1 TB ● Upto 1 TB 7200 RPM FIPS Self Upto 500 GB Encrypting Opal 2.0 Hard Disk Drive Chipset Table 5. Chipset specifications Type Intel Q370 Non-volatile memory on chipset Yes BIOS configuration SPI (Serial Peripheral Interface) 256 Mbit (32 MB) located at SPI_FLASH on chipset Trusted Platform Module (TPM) 2.0 Security Device (Discrete 24 KB located at TPM 2.0 on chipset TPM Enabled) Firmware-TPM (Discrete TPM disabled) NIC EEPROM By default the Platform Trust Technology feature is visible to the OS LOM configuration contained within LOM e-fuse - no dedicated LOM EEPROM Storage combinations Table 6. Storage combinations Primary/Boot drive 1 x M.2 Drive 1 x 2.5 inch HDD with M.2 Optane 1 x 2.5 inch HDD with M.2 Optane 1 x 2.5 inch HDD with M.2 Optane 1 x 3.5 inch HDD with M.2 Optane 1 x 3.5 inch HDD with M.2 Optane 1 x 3.5 inch HDD with M.2 Optane Secondary drive Intel Optane Memory 2.5 500 GB 7200 RPM HDD + Intel Optane Memory 2.5 1 TB 7200 RPM HDD + Intel Optane Memory 2.5 2 TB 5400 RPM HDD + Intel Optane Memory 3.5 500 GB 7200 RPM HDD + Intel Optane Memory 3.5 1 TB 7200 RPM HDD + Intel Optane Memory 3.5 2 TB 7200 RPM HDD + Intel Optane Memory 12 System specifications