Dell OptiPlex 5060 Tower Setup and specifications guide - Page 19
System information, Table 19. General, continued, Table 20. System Configuration
![]() |
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table 19. General (continued) Option Description Boot Sequence Allows you to specify the order in which the computer attempts to find an operating system from the devices specified in this list. Advanced Boot Options Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default, this option is selected. ● Enable Legacy Option ROMs-Default ● Enable Attempt Legacy Boot UEFI Boot Path Security This option controls whether or not the system will prompt the user to enter the Admin password when booting a UEFI boot path from the F12 Boot Menu. ● Always, Except Internal HDD-Default ● Always ● Never Date/Time Allows you to set the date and time settings. Changes to the system date and time take effect immediately. . System information Table 20. System Configuration Option Description Integrated NIC Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not selected by default. The options are: ● Disabled ● Enabled ● Enabled w/PXE (default) NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not appear. Serial Port SATA Operation Drives Smart Reporting USB Configuration Determines how the built-in serial port operates. Choose any one option: ● Disabled ● COM1 (selected by default) ● COM2 ● COM3 ● COM4 Allows you to configure the operating mode of the integrated hard drive controller. ● Disabled = The SATA controllers are hidden ● AHCI = SATA is configured for AHCI mode ● RAID ON = SATA is configured to support RAID mode (selected by default) Allows you to enable or disable the various drives on-board: ● SATA-0 (enabled by default) ● SATA-2 ● SATA-3 (enabled by default) ● SATA-4 ● M.2 PCIe SSD-3 This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. Allows you to enable or disable the integrated USB controller for: ● Enable USB Boot Support BIOS setup 19
![](/manual_guide/products/dell-optiplex-5060-tower-setup-specifications-guide-f5478da/19.png)