Dell OptiPlex 5060 Tower Setup and specifications guide - Page 21
Table 22. Security continued, Option, Description, Allow Non-Admin Password Changes
View all Dell OptiPlex 5060 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Table 22. Security (continued) Option Description Internal HDD-0 Password Allows you to set, change, and delete the computer's internal HDD. Strong Password This option lets you enable or disable strong passwords for the system. Password Configuration Allows you to control the minimum and maximum number of characters allowed for a administrative password and the system password. The range of characters is between 4 and 32. Password Bypass This option lets you bypass the System (Boot) Password and the internal HDD password prompts during a system restart. ● Disabled - Always prompt for the system and internal HDD password when they are set. This option is disabled by default. ● Reboot Bypass - Bypass the password prompts on Restarts (warm boots). NOTE: The system will always prompt for the system and internal HDD passwords when powered on from the off state (a cold boot). Also, the system will always prompt for passwords on any module bay HDDs that may be present. Password Change This option lets you determine whether changes to the System and Hard Disk passwords are permitted when an administrator password is set. Allow Non-Admin Password Changes - This option is enabled by default. UEFI Capsule Firmware Updates TPM 2.0 Security Computrace Chassis Intrusion Admin Setup Lockout Master Password Lockout This option controls whether this system allows BIOS updates via UEFI capsule update packages. This option is selected by default. Disabling this option will block BIOS updates from services such as Microsoft Windows Update and Linux Vendor Firmware Service (LVFS) Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system. ● TPM On (default) ● Clear ● PPI Bypass for Enable Commands ● PPI Bypass for Disable Commands ● PPI Bypass for Clear Commands ● Attestation Enable (default) ● Key Storage Enable (default) ● SHA-256 (default) Choose any one option: ● Disabled ● Enabled (default) This field lets you Activate or Disable the BIOS module interface of the optional Computrace Service from Absolute Software. Enables or disables the optional Computrace service designed for asset management. ● Deactivate ● Disable ● Activate - This option is selected by default. This field controls the chassis intrusion feature. Choose any one of the option: ● Disabled (default) ● Enabled ● On-Silent Allows you to prevent users from entering Setup when Admin password is set. This option is not set by default. Allows you to disable master password support Hard Disk passwords need to be cleared before the settings can be changed. This option is not set by default. BIOS setup 21