Dell OptiPlex 9020 AIO Owner's Manual - Page 14
Installing the VESA Mount Bracket, Removing the Power and On-Screen Display (OSD) Buttons Board
View all Dell OptiPlex 9020 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing the VESA Mount Bracket 1. Align and place the bracket on the back of the computer. 2. Tighten the screws that secure the VESA mount bracket to the computer. 3. Install the: a) back cover b) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Power and On-Screen Display (OSD) Buttons Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover 3. Disconnect the cable from the and power and on-screen display (OSD) buttons board. Lift the power and on-screen display (OSD) buttons board from the chassis. 14
Installing the VESA Mount Bracket
1.
Align and place the bracket on the back of the computer.
2.
Tighten the screws that secure the VESA mount bracket to the computer.
3.
Install the:
a)
back cover
b)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power and On-Screen Display (OSD) Buttons Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
3.
Disconnect the cable from the and power and on-screen display (OSD) buttons board. Lift the power and on-screen
display (OSD) buttons board from the chassis.
14