Dell OptiPlex 9020 AIO Owner's Manual - Page 19
Installing the Optical Drive, Removing the Hard Drive - hard drive removal
View all Dell OptiPlex 9020 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the Optical Drive 1. Place the optical-drive bracket on the optical drive. 2. Tighten the screws that secure the optical-drive bracket to the optical drive. 3. Align and slide the optical drive into its slot. 4. Connect the optical-drive cable. 5. Tighten the screws that secure the optical drive to the computer. 6. Install the: a) back cover b) VESA stand 7. Follow the procedures in After Working Inside Your Computer. Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket 3. Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables from the hard drive. 4. Remove the screw that secures the hard-drive bracket to the system board. Slide and lift the hard-drive bracket away from the computer. 19