Dell OptiPlex 9020 AIO Owner's Manual - Page 15
Installing the Power and On-Screen Display (OSD) Buttons Board, Removing the System-Board Shield - vesa mount
View all Dell OptiPlex 9020 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing the Power and On-Screen Display (OSD) Buttons Board 1. Align and place the power and on-screen display (OSD) buttons board on the computer. 2. Connect the cable to the power and on-screen display (OSD) buttons board. 3. Install: a) back cover b) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the System-Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket 3. Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from the computer. 15
Installing the Power and On-Screen Display (OSD) Buttons Board
1.
Align and place the power and on-screen display (OSD) buttons board on the computer.
2.
Connect the cable to the power and on-screen display (OSD) buttons board.
3.
Install:
a)
back cover
b)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the System-Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
c)
VESA mount bracket
3.
Remove the screws that secure the system-board shield to the computer. Lift the system-board shield away from
the computer.
15