Dell OptiPlex 9020 Owner's Manual - Small Form Factor - Page 21
Removing the Input/Output (I/O) Panel
View all Dell OptiPlex 9020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. Install the: a) drive cage b) optical drive c) front bezel d) cover 4. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover b) optical drive c) drive cage d) front bezel 3. Disconnect the I/O panel or FlyWire cable and the audio cable from the system board. 4. Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to release and remove it from the computer. 21
3.
Install the:
a)
drive cage
b)
optical drive
c)
front bezel
d)
cover
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
cover
b)
optical drive
c)
drive cage
d)
front bezel
3.
Disconnect the I/O panel or FlyWire cable and the audio cable from the system board.
4.
Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to release and remove it from
the computer.
21