Dell OptiPlex 9020 Owner's Manual - Small Form Factor - Page 29

Installing the System Board - ports

Get Dell OptiPlex 9020 PDF manuals and user guides View all Dell OptiPlex 9020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

4. Remove the screws that secure the system board to the chassis. 5. Turn the hex screw counter clockwise and remove from the system board. 6. Remove the system board from the chassis. Installing the System Board 1. Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis. 2. Tighten the screws securing the system board to the chassis. 3. Connect the cables to the system board. 4. Install the: a) power supply b) expansion card(s) c) heat sink assembly d) memory e) drive cage f) optical drive g) front bezel h) cover 5. Follow the procedures in After Working Inside Your Computer. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
4.
Remove the screws that secure the system board to the chassis.
5.
Turn the hex screw counter clockwise and remove from the system board.
6.
Remove the system board from the chassis.
Installing the System Board
1.
Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis.
2.
Tighten the screws securing the system board to the chassis.
3.
Connect the cables to the system board.
4.
Install the:
a)
power supply
b)
expansion card(s)
c)
heat sink assembly
d)
memory
e)
drive cage
f)
optical drive
g)
front bezel
h)
cover
5.
Follow the procedures in
After Working Inside Your Computer
.
29