Dell Optiplex Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC Syste - Page 135
Rotate the lever toward the back of the computer until it stops in
![]() |
UPC - 718122898176
View all Dell Optiplex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
The computer has a removable expansion-card cage. The expansion-card cage contains the riser board and any installed expansion cards. Dell recommends that you remove the expansion-card cage first before removing or installing expansion cards. If you are not removing any expansion cards, leave the external cables attached to them. chassis bottom slot expansion-card cage lever To remove the expansion-card cage, follow these steps: 1. Rotate the lever toward the back of the computer until it stops in the upright position. 2. Slide the expansion-card cage out of the computer. To replace the expansion-card cage, align the tabs on the left and right sides of the expansion-card cage with the slots on the back and bottom of the chassis. With the securing lever in its extended position, slide the expansion-card cage into place. Removing and Replacing Parts on the Mini Tower Chassis 6-17
![](/manual_guide/products/dell-optiplex-gx1-dell-optiplex-gx1gx1p-managed-pc-optiplex-nx1-net-pc-systems-service-manual-d7d6f32/135.png)