Dell Optiplex Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC Syste - Page 81
Remove the two drive-mounting screws from the left side of the drive,
UPC - 718122898176
View all Dell Optiplex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
drive-mounting screws (2) 3.5-inch diskette-drive-assembly latches (2) front of computer hooks (2) To remove the 3.5-inch diskette drive assembly, follow these steps: 1. Disconnect the DC power cable and the interface cable from the back of the diskette drive. 2. Press the two 3.5-inch diskette-drive-assembly latches to the left to release the assembly. Rotate the left side of the assembly up, and lift the assembly out of the chassis. 3. Remove the two drive-mounting screws from the left side of the drive, and remove the drive from the bracket. When you replace the 3.5-inch diskette drive, be sure that the mounting holes on the right side of the drive engage the two hooks on the bracket. Removing and Replacing Parts on the Low-Profile Chassis 4-9