Dell PowerConnect 3324 User's Guide - Page 267

CLI Command switchport general pvid vlan-id switchport general allowed vlan add vlan-list [tagged | untagged] switchport general allowed vlan remove vlan-list [tagged | untagged] switchport general acceptable-frame-types tagged-only switchport general ingressfiltering off Description Configure the Port VLAN ID (PVID) when the interface is in general mode. Adds VLANs to a general port. Removes VLANs from a general port. Discards untagged frames at ingress. Disables port ingress filtering. The following is an example of the CLI commands: Console (config)# interface port channel 1 1/e8 Console (config-if)# switchport mode access console (config-if)# switchport LAG native vlan 123 Console (config-if)# switchport general pvid 234 Console (config-if)# switchport general allowed vlan add 1,2,5,6 tagged Console (config-if)# switchport general acceptable-frame-types tagged-only Console (config-if)# switchport general ingress-filtering disable Configuring GVRP The GARP VLAN Registration Protocol (GVRP) protocol is specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to individually configure each bridge, and to register VLAN membership. To minimize the memory requirements when running the GVRP protocol, two proprietary tuning variables have been added to the standard variables: • Maximum number of GVRP VLANs-Displays the number of GVRP VLANs allowed to participate in GVRP operation. Configuring Switch Infor mation 267