Dell PowerConnect 3524 Command Line Interface Guide - Page 350

Syntax • snmp-server set variable-name name1 value1 [ name2 value2 ...] • variable-name - MIB variable name. • name value - List of name and value pairs. In the case of scalar MIBs, only a single pair of name values. In the case of an entry in a table, at least one pair of name and value followed by one or more fields. Default Configuration This command has no default configuration. Command Mode Global Configuration mode. User Guidelines • Although the CLI can set any required configuration, there might be a situation where a SNMP user sets a MIB variable that does not have an equivalent command. In order to generate configuration files that support those situations, the snmp-server set command is used. • This command is case-sensitive. Examples The following example configures the scalar MIB sysName with the value dell. Console(config)# snmp-server set sysName sysname dell show snmp The show snmp Privileged EXEC mode command displays the SNMP status. Syntax • show snmp Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode. User Guidelines There are no user guidelines for this command. 350 SNMP Commands