Dell PowerConnect 3524 Command Line Interface Guide - Page 89

enable password The enable password Global Configuration mode command sets a local password to control access to user and privilege levels. Use the no form of this command to remove the password requirement. Syntax • enable password [level level] password [encrypted] • no enable password [level level] • password - Password for this level. (Range: 1 - 159 characters) • level - Level for which the password applies. If not specified the level is 15. (Range: 1 - 15) • encrypted - Encrypted password entered, copied from another device configuration. Default Configuration No enable password is defined. Command Mode Global Configuration mode. User Guidelines There are no user guidelines for this command. Example The following example sets local level 15 password secret to control access to privilege levels. Console(config)# enable password level 15 secret username The username Global Configuration mode command creates a user account in the local database. Use the no form of this command to remove a user name. Syntax • username name [password password] [level level] [encrypted] • no username name • name - The name of the user. (Range: 1 - 20 characters) • password - The authentication password for the user. (Range: 8 - 64 characters) • level - The user level. (Range: 1 - 15) • encrypted - Encrypted password entered, copied from another device configuration. AAA Commands 89