Dell PowerConnect 3524 Command Line Interface Guide - Page 473
switchport trunk allowed vlan, Consoleconfig
View all Dell PowerConnect 3524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 473 highlights
Example The following example configures a VLAN ID of 23 to the untagged layer 2 VLAN Ethernet port 1/e16. Console(config)# interface ethernet 1/e16 Console(config-if)# switchport access vlan 23 switchport trunk allowed vlan The switchport trunk allowed vlan Interface Configuration mode command adds or removes VLANs to or from a trunk port. Syntax • switchport trunk allowed vlan {add vlan-list | remove vlan-list } • add vlan-list - List of VLAN IDs to be added. Separate non-consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. • remove vlan-list - List of VLAN IDs to be removed. Separate non-consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. Default Configuration This command has no default configuration. Command Mode Interface Configuration (Ethernet, port-channel) mode. User Guidelines There are no user guidelines for this command. Example The following example adds VLANs 1, 2, 5 to 6 to the allowed list of Ethernet port 1/e16. Console(config)# interface ethernet 1/e16 console(config-if)# switchport trunk allowed vlan add 1-2,5-6 switchport trunk native vlan The switchport trunk native vlan Interface Configuration mode command defines the native VLAN when the interface is in trunk mode. Use the no form of this command to return to the default configuration. VLAN Commands 473