Dell PowerConnect 3548P User's Guide - Page 248
File Download from Server, Source File Name 1-64 characters - firmware
View all Dell PowerConnect 3548P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
The File Download from Server page contains the following fields: • Supported IP Format - Specifies the IP format supported by the server. The possible values are: - IPv6 - IP version 6 is supported. - IPv4 - IP version 4 is supported. • IPv6 Address Type - When the server supports IPv6 (see previous parameter), this specifies the type of static address supported. The possible values are: - Link Local - A Link Local address that is non-routable and used for communication on the same network only. - Global - A globally unique IPv6 address; visible and reachable from different subnets. • Link Local Interface - When the server supports an IPv6 Link Local address (see previous parameter), this specifies the the Link Local interface. The possible values are: - VLAN1 - The IPv6 interface is configured on VLAN1. - ISATAP - The IPv6 interface is configured on ISATAP tunnel. • Firmware Download - The Firmware file is downloaded. If Firmware Download is selected, the Configuration Download fields are grayed out. • Configuration Download - The Configuration file is downloaded. If Configuration Download is selected, the Firmware Download fields are grayed out. • Download via TFTP - Enables initiating an image upload via the TFTP server. • Download via HTTP - Enables initiating an image upload via the HTTP server. Firmware Download • Server IP Address - The Server IP Address from which the firmware files are downloaded. • Source File Name (1-64 characters) - Indicates the file to be downloaded. • Destination File Name - The destination file type to which the file is downloaded. The possible field values are: - Software Image - Downloads the Image file. The image file overwrites the non-active image. It is recommended to designate that the non-active image becomes the active image after reset, and then to reset the device following the download. During the Image file download a dialog box opens which displays the download progress. The window closes automatically when the download is complete. - Boot Code - Downloads the Boot file. 248 Configuring System Information