Dell PowerConnect 3548P User's Guide - Page 96
Power Over Ethernet, Apply Changes, Show All, Power, Over Ethernet
View all Dell PowerConnect 3548P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Defining PoE Settings 1 Open the Power Over Ethernet page. 2 Define the fields. 3 Click Apply Changes. PoE settings are defined, and the device is updated. Displaying PoE Settings for All Ports 1 Open the Power Over Ethernet page. 2 Click Show All. The Power Over Ethernet Table opens. Figure 6-6. Power Over Ethernet Table Managing PoE Using the CLI Commands The following table summarizes the equivalent CLI commands for viewing fields displayed on the Power Over Ethernet page. Table 6-5. System Health CLI Commands CLI Command Description power inline {auto | never} Configures the administrative mode of the inline power on an interface. power inline powered-device Adds a description of the powered device type. pd-type power inline priority {critical | high | low} Configures the priority of the interface from the point of view of inline power management. power inline usage-threshold Configures the threshold for triggering alarms power inline traps enable Enables PoE device traps show power inline [ethernet Displays PoE configuration information interface ] 96 Configuring System Information