Dell PowerConnect 5424 Command Line Interface Guide - Page 67
IC (Interface Configuration) Mode, Con s the number of DNS Query/Router Solicitation refresh - dhcp
View all Dell PowerConnect 5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
tacacs-server source-ip tacacs-server timeout tacacs-server host tunnel isatap query-interval tunnel isatap robustness tunnel isatap solicitationinterval username vlan database wrr-queue cos-map Specifies the source IP address that will be used for the communication with TACACS servers. Sets the timeout value. Specifies a TACACS+ host. Configures the interval between DNS Queries (before the IP address of the ISATAP router is known) for the automatic tunnel router domain name. Configures the number of DNS Query/Router Solicitation refresh messages that the device sends. Configures the interval between ISATAP router solicitations messages (when there is no active ISATAP router). Establishes a username-based authentication system. Enters the VLAN Database Configuration mode. Maps assigned CoS values to select one of the egress queues. IC (Interface Configuration) Mode Command back-pressure channel-group clear host dhcp description dot1x auth-not-req dot1x guest-vlan dot1x guest-vlan enable dot1x mac-authentication dot1x radius-attributes vlan dot1x traps mac-authentication failure dot1x max-req dot1x port-control dot1x re-authentication Description Enables Back Pressure on a given interface. Associates a port with a Port-channel. Sets an IP address on the device. Adds a description to an interface. Enables unauthorized users access to that VLAN Defines a Guest VLAN. Enables unauthorized users on the interface an access to the Guest VLAN. Enables authentication based on the station's MAC address. Enables user-based VLAN assignment. Enables sending traps when a MAC address was failed in authentication of the 802.1X MAC authentication access control. Sets the maximum number of times that the switch sends an EAP request/identity frame to the client, before restarting the authentication process. Enables manual control of the authorization state of the port Enables periodic re-authentication of the client. Command Modes 67