Dell PowerConnect 5524P Getting Started Guide - Page 5
Installation
View all Dell PowerConnect 5524P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation Overview This guide describes how to install and run the PowerConnect 5500 series switches. For more information, see the Dell PowerConnect 5500 Series User Guide, available on your Documentation CD, or check the Dell Support website at support.dell.com/manuals for the latest updates on documentation and software. In this document, the word "switch" refers to either a single switch or a group of stacked switches. For a complete description of the PowerConnect 5500 series switch, see the Dell PowerConnect 5500 Series User Guide, available on your Documentation CD. NOTE: Even though the graphics in this guide show the Dell PowerConnect 5524P device, the instructions are the same for all models. Site Preparation PowerConnect 5500 series switches can be mounted in a standard 48.26-cm (19-inch) equipment rack or placed on a tabletop. Before installing the unit, verify that the chosen location for installation meets the following site requirements: • Power - - The unit is installed near an easily accessible 100-240 VAC, 50-60 Hz outlet. - If a Redundant Power Supply (RPS) or a Modular Power Supply (MPS) is being used, check that it is easily accessible. • Clearance - There is adequate frontal clearance for operator access. Allow clearance for cabling, power connections, and ventilation. Getting Started Guide 5