Home » Dell Manuals » Hubs & Switches » Dell PowerConnect 8100 » Manual Viewer

Dell PowerConnect 8100 Deploying Dell PowerConnect 8100 and Cisco Catalyst Swi - Page 17

PowerConnect 8100 User's, Configuration Guide, For more information

View all Dell PowerConnect 8100 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Deploying the Dell PowerConnect 8100 with the Cisco Catalyst interface option enforces the dropping of CDP packets for the ingress on this interface even if the global setting is enabled). For more information, see the Link Local Protocol Filtering section in the PowerConnect 8100 User's Configuration Guide. 17

Section	Page
Introduction	4
Overview of VLANs	5
Creating and assigning VLANs	5
Management VLAN vs. SVI on the Cisco Catalyst 6500	5
Dell PowerConnect 8100 CLI	6
Cisco Catalyst CLI	7
Access, trunk and general Switchport Modes	8
VLAN configuration example	9
Dell PowerConnect 8100 CLI	9
Cisco Catalyst CLI	10
PVID and native VLAN	11
Dell PowerConnect 8100 CLI	11
Cisco Catalyst CLI	12
Creating and connecting LAGs using LACP	13
Enabling Spanning Tree – RSTP vs. RPVST+	13
Method 1: Portfast	14
Dell PowerConnect 8100 CLI	15
Cisco Catalyst CLI	15
Method 2: MSTP	16
Cisco proprietary protocols	16
Appendix A - Network switch versions	18

Match case Limit results 1 per page

Deploying the Dell PowerConnect 8100 with the Cisco Catalyst

interface option enforces the dropping of CDP packets for the ingress on this interface even if the

global setting is enabled).

For more information, see the Link Local Protocol Filtering section in the

PowerConnect 8100 User’s

Configuration Guide