Dell PowerConnect B-RX BigIron RX Installation Guide - Page 43
Mounting a BigIron RX-4 chassis in a rack,
View all Dell PowerConnect B-RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing a BigIron RX-4 switch 2 To perform this task, you need a #2 Phillips-head screwdriver. FIGURE 17 Removing the extra screws used for shipment 1 2 3 1 Chassis front 2 Shipping screws 3 Chassis rear Mounting a BigIron RX-4 chassis in a rack Follow the steps given below to mount a BigIron RX-4 chassis in a rack. 1. Determine the position of each chassis in the rack, for example, a chassis with the fewest modules on top, a chassis with more modules than the top chassis in the middle, and a fully populated chassis on the bottom. 2. Position two of the four screws for each chassis according to the spacings of the keyhole slots on the mounting brackets as shown in Figure 18. Do not secure the screws completely; leave approximately 1/4 inch of clearance between the back of the screw head and the rack. FIGURE 18 Positioning the screws in a rack 5" 1 1 Unequal flange equipment rack 3" 2 2 Network equipment rack BigIron RX Installation Guide 31 53-1001811-01