Dell PowerConnect J-8216 Release Notes JUNOS version 10.3 - Page 56

Interfaces, J-Web Browser Support

Page 56 highlights

Junos 10.3 OS Release Notes Interfaces • J-EX Series Ethernet switches do not support queued packet counters. Therefore, the queued packet counter in the output of the show interfaces interface-name extensive command always displays a count of 0 and is never updated. • The following message might appear in the system log: Resolve request came for an address matching on Wrong nh nh:355, type:Unicast...? You can ignore this message. • On J-EX4200 switches, when port mirroring is configured on any interface, the mirrored packets leaving a tagged interface might contain an incorrect VLAN ID. • On J-EX8200 switches, port mirroring configuration is not supported on a Layer 3 interface with the output configured to a VLAN. • On J-EX8200 switches, when an egress VLAN that belongs to a routed VLAN interface (RVI) is configured as the input for a port mirroring analyzer, the analyzer incorrectly appends a dot1q (802.1Q) header to the mirrored packets or does not mirror any packets at all. As a workaround, configure a port mirroring analyzer with each port of the VLAN as egress input. • The following interface counters are not supported on routed VLAN interfaces (RVIs): local statistics, traffic statistics, and transit statistics. • J-EX Series Ethernet switches do not support IPv6 interface statistics. Therefore, all values in the output of the show snmp mib walk ipv6IfStatsTable command always display a count of 0. • The show interfaces interface-name detail | extensive command might display double counting of packets or bytes for the transit statistics and traffic statistics counters. You can use the counter information displayed under the Physical interface section of the output. J-Web Browser Support • J-Web Browser Support for Your Dell PowerConnect J-Series Devices-To access the J-Web interface for all platforms, your management device requires the following Windows operating system and browsers: • Operating System: Microsoft Windows XP Service Pack 3 • Browser: Microsoft Internet Explorer version 7.0 or Mozilla Firefox version 3.0 NOTE: Other browser versions may work but are not supported. NOTE: Only English-version browsers are supported. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65

Interfaces
J-EX Series Ethernet switches do not support queued packet counters. Therefore, the
queued packet counter in the output of the
show interfaces
interface-name
extensive
command always displays a count of 0 and is never updated.
The following message might appear in the system log:
Resolve request came for an address matching on Wrong nh nh:355,
type:Unicast...?
You can ignore this message.
On J-EX4200 switches, when port mirroring is configured on any interface, the mirrored
packets leaving a tagged interface might contain an incorrect VLAN ID.
On J-EX8200 switches, port mirroring configuration is not supported on a Layer 3
interface with the output configured to a VLAN.
On J-EX8200 switches, when an egress VLAN that belongs to a routed VLAN interface
(RVI) is configured as the input for a port mirroring analyzer, the analyzer incorrectly
appends a dot1q (802.1Q) header to the mirrored packets or does not mirror any packets
at all. As a workaround, configure a port mirroring analyzer with each port of the VLAN
as egress input.
The following interface counters are not supported on routed VLAN interfaces (RVIs):
local statistics, traffic statistics, and transit statistics.
J-EX Series Ethernet switches do not support IPv6 interface statistics. Therefore, all
values in the output of the
show snmp mib walk ipv6IfStatsTable
command always
display a count of 0.
The
show interfaces
interface-name
detail | extensive
command might display double
counting of packets or bytes for the transit statistics and traffic statistics counters.
You can use the counter information displayed under the
Physical interface
section of
the output.
J-Web Browser Support
J-Web Browser Support for Your Dell PowerConnect J-Series Devices
—To access
the J-Web interface for all platforms, your management device requires the following
Windows operating system and browsers:
Operating System: Microsoft Windows XP Service Pack 3
Browser: Microsoft Internet Explorer version 7.0 or Mozilla Firefox version 3.0
NOTE:
Other browser versions may work but are not supported.
NOTE:
Only English-version browsers are supported.
56
Junos 10.3 OS Release Notes