Dell PowerConnect W-620 Installation Guide - Page 9
AC Power Socket, 100BaseT Ethernet Ports, 100/1000Base-T Gigabit Ethernet Port, - console
View all Dell PowerConnect W-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Rear View Figure 2 W-620 Series Series Rear View Serial Console Port 10/100Base-T Ethernet Ports 10/100/1000Base-T Gigabit Ethernet Port Media Eject Button USB port AC Power Socket AC Power Socket The W-620 Series supports integrated AC powering and the AC power socket on the rear of the unit is for use with an AC power cord (country-specific). Refer to Appendix A, "Specifications, Safety, & Compliance" on page 15 for power specification details. 10/100BaseT Ethernet Ports There are eight 10/100BaseT Ethernet ports on the W-620 Series. Ports 0 through 3 support Power over Ethernet (PoE). Ports 4 through 7 do not support PoE and do not have a PoE LED. Instead, they have an LED labeled 100, which indicates interface speed. For information about LED behavior, see Table 3. 10/100/1000Base-T Gigabit Ethernet Port There is one 10/100/1000Base-T Gigabit Ethernet (RJ-45) port on the W-620 Series. Gigabit Ethernet uses all eight wires and each pair is used in a bi-directional fashion, meaning the same pairs are used for both data transmission and reception. Figure 3 illustrates the CAT-5 pin-out found on an RJ-45 connector. The CAT-5 pinout pairs the following pins on a 10/100/1000Base-T Gigabit Ethernet port: 1/2, 3/6, 4/5, and 7/8. Figure 3 Gigabit Ethernet Port Pin-Out 1000Base-T Gigabit Ethernet Port RJ-45 Female Pin-Out 1 2 3 4 5 6 7 8 Signal Name BI_DA+ BI_DABI_DB+ BI_DC+ BI_DCBI_DBBI_DD+ BI_DD- Function Bi-directional pair +A Bi-directional pair -A Bi-directional pair +B Bi-directional pair +C Bi-directional pair -C Bi-directional pair -B Bi-directional pair +D Bi-directional pair -D Dell PowerConnect W-620 Controller | Installation Guide About the W-620 Controller | 9